top of page

ADVERT & SIGNS.

ADVERT & SIGNS.

Signage Materials Compared: Acrylic, ACP, Aluminium, Steel and PVC

Writer: Advert & Signs Team
Advert & Signs Team
Feb 21, 2024
5 min read

Updated: Nov 10



signage maker


Short answer: Choose acrylic for colour, light and versatility; aluminium composite panel (ACP) for large, flat, durable panels; aluminium for light, rust-free letters and frames; stainless steel for premium, long-lasting letters; and PVC foam board or foam board for indoor or short-term signs. Outdoors in Singapore, pick UV-stable and corrosion-resistant grades and stainless fixings, because the cheapest version of any material is what fails first.


Signage materials at a glance

Material

Look

Outdoor durability

Weight

Relative cost

Best for

Cast acrylic

Glossy, clear or coloured; lets light through

Good when UV-stable

Light

Medium

Letters, panels, lightbox faces

Extruded acrylic

Similar look

Fair; crazes more easily

Light

Low to medium

Indoor printed panels

Polycarbonate

Clear, slightly softer look

Very good impact resistance

Light

Medium to high

Signs at risk of knocks or vandalism

ACP (aluminium composite panel)

Flat, painted metal surface

Very good

Light for its size

Medium

Large signboards, backing panels, facade cladding

Aluminium sheet and extrusions

Painted, powder-coated or brushed

Very good; doesn't rust

Light

Medium

3D letters, frames, pylons

Stainless steel (304 or 316)

Mirror, brushed or PVD-coloured metal

Excellent with 316 near the sea

Heavy

High

Premium letters and plaques

Brass

Warm gold, darkens with age

Good if lacquered

Heavy

High

Heritage plaques and house names

Galvanised mild steel

Painted structural frames

Good if galvanised and painted

Heavy

Low to medium

Pylon and sign structures

PVC foam board

Matte, flat

Fair; sheltered outdoor only

Light

Low

Indoor signs and displays

Foam board and KT board

Matte, flat

Poor

Very light

Lowest

Short-term indoor signs

Corrugated plastic

Fluted plastic sheet

Short-term

Very light

Low

Temporary outdoor signs

Vinyl (cut or printed)

Any colour, any graphic

Good with laminate

Negligible

Low

Graphics on any of the above


Acrylic vs ACP

This is the choice most shop owners face for a flat signboard.


Acrylic

ACP

Surface

Glossy, deep colour; can be clear or translucent

Flat, satin painted metal finish

Light

Can be lit from behind

Opaque; lit only from the front or by cut-outs backed with acrylic

Strength

Rigid but brittle under sharp blows

Tough; resists dents better

Large sizes

Heavier and pricier as sheets get bigger

Light and stiff even in large panels

Cutting

Laser-cuts with polished edges

Routed; can be folded into trays and boxes

Typical use

Lightbox faces, letters, premium panels

Signboard backings, fascia panels, routed lit signs

A common combination is an ACP fascia with routed-out letters backed by opal acrylic, which gives a durable face and lit lettering.


Choosing by situation

Situation

Good choice

Avoid

Shopfront fascia, outdoor

ACP panel with acrylic or 3D letters

Foam board, extruded acrylic, mild steel

Premium reception wall

Stainless steel or acrylic letters

Printed foam board

Seaside or industrial site

316 stainless, aluminium, powder-coated finishes

304 stainless with rough finish, zinc-plated screws

Car park or loading bay

Aluminium or polycarbonate

Acrylic where it will be knocked

One-day event

Foam board, KT board, roll-up banner

Expensive permanent materials

Indoor signs lasting a year or more

PVC foam board, acrylic

Paper and foam board


Finishes and fixings matter as much as the material

  • Coatings: powder coating outlasts ordinary paint on metal. Laminates protect printed vinyl from UV and scratches.

  • Fixings: use stainless steel screws, studs and stand-offs outdoors. Zinc-plated fixings can rust quickly outdoors and stain the wall.

  • Edges: polished acrylic edges catch light; sealed ACP edges stop moisture getting into the core.

  • Substrate: the wall must take the weight and the fixings; plaster and lightweight cladding need special anchors or a sub-frame.


What material choice does to price

Material changes the price of the same sign significantly. For example, small 3D acrylic letters cost about $400 to $1,200, while stainless steel letters of a similar size start around $1,200 and can reach $3,500. Within each material, grade matters too: cast acrylic costs more than extruded, and 316 stainless steel more than 304. See the full signage cost guide.

For deeper comparisons, see our guides to acrylic, metal, acrylic vs stainless steel and large-format print materials.


Materials by sign type

Sign

Usual materials

Lightbox

Cast acrylic or flex face; aluminium or galvanised steel frame; stainless fixings

3D letters

Acrylic, aluminium or stainless steel; acrylic faces for front-lit letters

Plaques and door signs

Stainless steel, brass, acrylic

Pylons and monoliths

Galvanised steel frame, ACP or aluminium cladding, acrylic panels

Wayfinding

Aluminium panels, acrylic, vinyl graphics

Safety and traffic signs

Aluminium with reflective sheeting, rigid PVC, photoluminescent material

Temporary and event signs

Foam board, KT board, corrugated plastic, PVC or fabric banners


Weight and fixing

The heavier the material, the more the wall has to take. Stainless steel letters and large steel-framed signs need fixings into solid structure, and drywall needs reinforcement before it is closed. ACP and aluminium are light for their size, which is why they are used for large panels and high facades. Whatever the material, outdoor fixings should be stainless steel.


Sustainability

  • Metals: aluminium and steel are widely recyclable at the end of a sign's life.

  • Durability: a sign that lasts longer creates less waste than one replaced every couple of years.

  • Design for change: lightboxes with replaceable faces and directories with slide-in panels avoid remaking whole signs.

  • LEDs: use far less power than older fluorescent lighting.

  • Temporary signs: PVC banners and foam boards are hard to recycle; reuse frames, design dateless graphics and choose fabric for repeat events.


Frequently asked questions


What is the most durable signage material?

For outdoor use in Singapore, grade 316 stainless steel and aluminium are among the most durable, followed by ACP and UV-stable cast acrylic. Fixings and finishes matter as much as the base material.

What is the difference between acrylic and ACP?

Acrylic is a rigid plastic that can be clear, coloured or lit from behind. ACP is two thin aluminium sheets with a plastic core: opaque, tough and light for large flat panels.

What is the cheapest signage material?

Foam board and KT board are cheapest, but they suit only short-term indoor use. PVC foam board is a low-cost option that lasts longer.

Which material is best for an outdoor shop signboard?

An ACP panel with acrylic, aluminium or stainless steel letters, using stainless fixings and outdoor-rated lighting if it is lit.

Is polycarbonate better than acrylic?

Polycarbonate is much tougher against impact, so it suits signs that may be knocked. Acrylic is clearer, more scratch-resistant and cheaper.

Which signage material is the most environmentally friendly?

Durable, recyclable materials such as aluminium and steel, used in designs that can be updated rather than replaced. Avoid single-use PVC where a reusable option works.

Can ACP be used for illuminated signs?

Yes. Letters are routed out of the ACP face and backed or filled with acrylic so only the letters glow, a durable and popular combination.


Sources


Not sure which material fits your sign? WhatsApp a photo of the site to Advert & Signs at +65 9862 5243, or see our signboard services.

Comments


bottom of page