top of page

ADVERT & SIGNS.

ADVERT & SIGNS.

Kitchen Cabinet and Wardrobe Wrapping in Singapore: Cost, Durability and Limits

Writer: Advert & Signs Team
Advert & Signs Team
11 hours ago
4 min read

Short answer: Wrapping refaces existing kitchen cabinets, wardrobes and other carpentry with self-adhesive architectural vinyl, usually in about a day and without removing the carcasses. It suits sound, flat doors. New laminate kitchen cabinets cost about $100 to $190 per foot run for each of the top and bottom runs, so price a wrap first. Keep film away from direct heat.

Infographic: kitchen cabinet wrap vs new cabinets in Singapore. About 1 day to wrap an HDB kitchen, whole-kitchen wrap $1,050 to $1,650, new cabinets $100 to $190 per foot run.

Wrap, relaminate or new cabinets: what's the difference?

Option

What it involves

Typical Singapore cost

Disruption

Vinyl wrap

Film applied over doors, drawer fronts and visible side panels

Small jobs from about $250; priced per panel or per job

About a day, no hacking, little dust

Relaminate

New high-pressure laminate sheets glued over the old surfaces and trimmed

Rarely published; usually quoted after a site check

More cutting and contact adhesive on site

New laminate cabinets

Old carpentry removed, new cabinets built and installed

Top $100–$160 and bottom $120–$190 per foot run; a typical HDB kitchen (10 ft top, 12 ft bottom) is about $2,440–$3,880, worktop extra

Several days, plus demolition

Wrap prices are typical published prices from Singapore installers in November 2026. Cabinet prices are 2026 market estimates from SmartCalculator Singapore. Published wrap prices for a whole HDB kitchen run from about $1,050 (3-room) to about $1,650 (4- or 5-room), and cabinet door fronts from about $36 to $42 per foot run. These are market ranges, not fixed quotes.

The big difference is what stays. A wrap keeps your carcasses, hinges, drawer runners and worktop. It changes the look, not the layout. If the layout doesn't work for you, or the carcasses are damaged, new cabinets are the better spend.

What can be wrapped in a kitchen?

  • Cabinet doors and drawer fronts: the main job. They are usually taken off, wrapped flat and rehung, so the film can be folded around the edges.

  • Visible end panels, plinths and fillers: wrapped in place so the whole run matches.

  • Tall units and fridge housings: the same as doors.

  • Wall-hung cabinets: the same as base cabinets.

  • Worktops: possible with some films, but hot pots, knives and standing water wear film quickly. Most owners keep the worktop or replace it separately.

3M also makes architectural film designed for interior tiled walls, which some owners use on an old backsplash. Ask to see a sample on your tiles first, because grout lines can show through.

Where does cabinet wrap struggle?

Be realistic about these spots before you commit:

  • Next to the hob and oven: vinyl softens with heat. Ask for the panels that take direct heat to be left in laminate or protected.

  • Under the sink and around the dishwasher: water sitting on film edges is the most common cause of lifting.

  • Swollen or chipped board: film shows every bump. Repair or replace those doors first.

  • Handle areas: edges that are touched all day wear first. Abrasion-resistant films are made for this.

  • High-gloss films: they show every dent and ripple underneath. Matte and woodgrain finishes are more forgiving.

Wardrobes, TV consoles and other carpentry

The same film refreshes almost any flat carpentry:

  • wardrobe doors, swing or sliding;

  • TV consoles and feature panels;

  • shoe cabinets and settee storage;

  • study desks and bookshelves;

  • vanity cabinets (keep the film clear of the wet zone around the basin).

Mirror and glass doors take window film, not vinyl. For glass, see our guide to glass frosting and window graphics.

Compared with new carpentry, a wrap is usually a fraction of the cost. New wardrobes are commonly quoted at about $200 to $350 per foot run in Singapore renovation cost guides.

How long does a cabinet wrap last?

It depends on the film, the preparation and where the panel is. 3M rates its DI-NOC architectural finishes at 12 years' durability for indoor applications (3M). 3M also says the film resists common stains, cleaners and disinfectants (3M Singapore). Horizontal and heat-exposed surfaces wear faster than doors.

Singapore wrap installers commonly give 1 year on workmanship, and some add up to 5 years on the film. Ask for both in writing.

Care is simple: wipe with a soft cloth and mild detergent. Avoid scouring pads, abrasive creams and strong solvents.

Treat a wrap as permanent. 3M lists DI-NOC as not removable, so if you rent, check your reinstatement clause first.

What happens on the day?

  1. Survey and sample. We check every door for swelling and chips, and hold samples up in your kitchen's light.

  2. Remove and prepare. Doors and handles come off. Surfaces are degreased, which matters in a cooking kitchen, and chips are filled and sanded flat.

  3. Wrap. Doors are wrapped flat, with the film folded around the edges onto the back. Fixed panels are wrapped in place.

  4. Rehang and adjust. Doors go back on, hinges are adjusted and handles are refitted. Many owners change handles at the same time.

A typical HDB kitchen takes about a day. There's no paint smell to wait out, because the adhesive comes on the film.

Choosing a finish

  • Woodgrain: the most popular, and it hides wear well.

  • Solid colours: clean and modern. Matte hides fingerprints better than gloss.

  • Stone and concrete: good for feature panels and islands.

  • Metallic: good for accents. Use it sparingly near heat.

Always see a physical sample in your own kitchen before ordering. Colours shift under warm and cool lighting.

FAQ

Is vinyl wrap waterproof?

The film itself resists water. The weak points are the edges and seams, so keep them out of standing water and wipe up spills.

Can you wrap over melamine or laminate cabinets?

Yes, if the surface is firmly bonded, smooth and clean. Lifting laminate or swollen board has to be fixed first.

Can you wrap aluminium cabinets?

3M says DI-NOC bonds to virtually any substrate, and metal is common, so aluminium cabinets can usually be wrapped once the surface has been checked and prepared.

Will wrapped cabinets look cheap?

Not with a good architectural film fitted with folded edges. Cheap films and butt-cut edges are what give wraps a bad name, so ask to see an edge on a finished job.

How do I get a quote?

WhatsApp us photos of the kitchen or wardrobe, rough measurements and the finish you like on +65 9862 5243, or see our vinyl wrap service. For doors, see our door wrapping guide.

Sources

Comments


bottom of page