top of page

ADVERT & SIGNS.

ADVERT & SIGNS.

Signage Warranties: What a Fair Warranty Should Cover

Writer: Advert & Signs Team
Advert & Signs Team
1 day ago
4 min read

Short answer: A fair signage warranty is written down and split by component: the structure and fixings, the electrical parts (LED modules and drivers), and the face or finish. It says how long each part is covered, whether labour and call-outs are included, what voids it, and how to make a claim. A single line saying "one-year warranty" leaves most of that open to argument.


Why warranties need to be split by component

Different parts of a sign fail in different ways and at different times. Fixings and frames rarely fail if they are specified properly. LED drivers, the power supplies that feed the lights, are the most common fault in lit signs. Faces and vinyl fade or yellow gradually under sun. One blanket period cannot describe all three fairly.


Component


How failure usually shows

What the warranty should say

Structure and fixings

Loose sign, rust stains, movement in wind

Period, and that it covers re-fixing and corrosion of supplied metalwork

LED modules

Dark patches, uneven brightness, colour shift

Period, and whether failed modules are replaced in matching colour

Drivers (power supplies)

Whole sign or section off, flickering

Period, replacement including labour and access

Face, print and vinyl

Fading, yellowing, peeling, bubbling

Period, and what counts as fading versus normal ageing

Workmanship

Water ingress, poor joints, misalignment

Period and response time for repairs


Common exclusions, and which are reasonable

Most exclusions are fair, as long as they are written down in advance.

  • Accidental or deliberate damage, such as impact from a vehicle or vandalism. Reasonable.

  • Power surges and building electrical faults. Reasonable, though a good sign maker will help diagnose.

  • Cleaning with solvents or abrasives, which can craze acrylic and strip finishes. Reasonable, if care instructions were given.

  • Changes or relocation by others. Reasonable; another contractor's work changes the sign.

  • Natural ageing, such as gradual colour change over years. Reasonable, but "fading" should be defined.

  • "Acts of God" covering ordinary weather. Not reasonable for an outdoor sign. Rain, sun and wind are exactly what it was built for.


Questions to ask before you sign

  1. Is the warranty in writing, and is it part of the quotation or contract?

  2. How long is each component covered?

  3. Are labour, call-out and access equipment included, or only parts?

  4. What is the response time for a fault?

  5. What voids the warranty?

  6. Does it transfer to a new owner or tenant if you sell the business?

  7. Are the LED and driver brands named, so replacements match?


How to keep your warranty valid

Follow the care instructions: mild soapy water and a soft cloth, no solvents. Keep the invoice and installation date. Report faults early; a flickering section is cheaper to fix before water spreads inside. And use the original installer for changes, or get written agreement before someone else works on the sign.

If your sign is out of warranty, our repair and maintenance guide explains typical faults and costs.


Warranty, maintenance and insurance: who covers what

Problem

Usually covered by

A defect in materials or workmanship within the warranty period

The sign maker's warranty

Wear, dirt and routine replacement of parts after the warranty

Maintenance, paid by the owner

Damage from accidents, vandalism or severe storms

Often excluded from warranties; possibly your business insurance

Damage caused by others altering the sign

Usually not covered


How to make a warranty claim

  1. Photograph the fault, by day and lit at night, and note when it started.

  2. Find the invoice and warranty terms, and check the fault falls within them.

  3. Contact the sign maker in writing with the photos and details.

  4. Don't let anyone else open or repair the sign first; that can void the warranty.

  5. Keep records of cleaning and maintenance, which show the sign was looked after.


Frequently asked questions


What is a normal warranty for a signboard in Singapore?

Terms vary by supplier and component. Ask for separate periods for the structure, the LEDs and drivers, and the face, in writing. [A&S to add: A&S's standard terms.]

Does a signage warranty cover LED failure?

It should, for a stated period, including the driver. Check whether labour and access equipment are included or only the parts.

Is fading covered by warranty?

Sometimes. Ask how fading is defined. Gradual change over years is normal ageing; rapid or patchy fading within months usually points to the wrong material.

Will cleaning my sign void the warranty?

Only if it damages the sign, typically from solvents or abrasive pads. Mild soapy water and a soft cloth are safe for most faces and letters.

Does a signage warranty cover storm damage?

Often not; severe weather, accidents and vandalism are common exclusions. Check the terms, and ask your insurer whether your business policy covers your signs.

Will someone else repairing my sign void the warranty?

It can. Many warranties exclude signs that have been altered or repaired by others, so contact the original sign maker first.


Sources

Want warranty terms in writing? Ask Advert & Signs for our terms, set out by component. WhatsApp +65 9862 5243 or request a quote.

Comments


bottom of page