top of page

ADVERT & SIGNS.

ADVERT & SIGNS.

Permit To Use and PE Certification for Large Signs

Writer: Advert & Signs Team
Advert & Signs Team
10 hours ago
4 min read

Short answer: In Singapore, an advertising sign or signboard larger than 10 m² that is carried by an advertising structure needs a Permit To Use from BCA before its license can be granted. A Professional Engineer (PE) prepares and certifies the structural design and submits through the CORENET e-Submission System. Large banners can also need PE certification. Budget roughly $500 to $1,500 for the PE's work.


When a Permit To Use is required

BCA's guidance is specific: you must obtain a Permit To Use (PTU) for an advertising sign or signboard with an area exceeding 10 m² that is supported by an advertising structure, before the sign license can be granted (BCA).

An "advertising structure" here means a frame or structure that carries the sign, rather than letters or panels fixed directly onto a wall. Typical examples:

  • Pylon and pole signs at industrial estates, petrol stations and car parks.

  • Rooftop frames carrying building names or skysigns.

  • Large gantries or free-standing billboards.

  • Big facade signs mounted on a separate steel frame.

If your sign is close to 10 m², ask your sign maker early. Designing just under the threshold, where it suits the site, can save time and cost.


Banners that need PE certification

BCA separately lists categories of banner that need a PE's certification, endorsed on the structural drawings. BCA's application checklist includes, for example, the display of a banner sign exceeding 30 m² (BCA checklist). Large building wraps and big event banners are the usual cases. See our guide to banners and temporary signs.


What the Professional Engineer does

A PE takes legal responsibility for the structure being safe. For a sign, that means:

  • Designing the structure and fixings for its own weight and for wind loads, which matter most for tall pylons and rooftop signs.

  • Checking the wall, roof or foundation the sign attaches to can take the loads.

  • Preparing and endorsing the structural drawings.

  • Submitting the Permit To Use through CORENET e-Submission.

Your PE will confirm the exact sequence for your structure, including any plan submission and inspection before the PTU is issued.


The order of steps for a large sign

  1. Site survey and concept, with the sign maker flagging that the sign is over 10 m² on a structure.

  2. Landlord, owner and any MCST or Town Council consent.

  3. PE structural design and drawings.

  4. Permit To Use process through CORENET, led by the PE.

  5. Advertisement or signboard license through BCA's Advertisement Licensing System, which can be granted once the PTU is in place.

  6. License number displayed on the sign; annual renewal.


What it adds to cost and time

PE certification for a sign typically costs $500 to $1,500, depending on the structure. The larger effect is on time: structural design and PTU add a stage to the programme, so large signs should be planned well ahead of an opening date. Foundations for pylons may also need excavation and concrete works.

Sign

PTU likely?

Why

3D letters fixed to a shopfront wall, 6 m²

No

Under 10 m² and no separate structure

Lightbox on a facade frame, 12 m²

Likely

Over 10 m² on a structure; confirm with PE

5 m pylon with 8 m² of sign faces

Check

Structure present but under 10 m²; your PE will advise

Rooftop building name on steel frame, 25 m²

Yes

Over 10 m² on an advertising structure

The table illustrates the rule as published. Your PE's assessment of the actual design decides.


Worked example: a 12 m² advertisement on a facade frame

A business wants a 12 m² advertising panel mounted on a steel frame fixed to its building facade.

  1. Is a Permit To Use needed? Yes: the sign is over 10 m² and sits on an advertising structure, so a Professional Engineer designs the frame and applies for the Permit To Use.

  2. Is it allowed at all? The panel is on the building, not on a free-standing structure or above the roof, and the building has no residential component, so it isn't in BCA's prohibited categories.

  3. License fee: advertisements above 10 m² are charged $20 per m² or part thereof, so 12 m² costs $240 a year.

  4. Other approvals: the building owner's consent, and URA's if the building is conserved.


Common causes of delay

  • Bringing in the PE after the design is fixed, so the frame has to be redesigned.

  • Missing information about the wall or roof the structure fixes to.

  • No owner's consent ready when the application is submitted.

  • Changing the sign's size after the structural design is done.


Questions to ask your PE

  • What loads and fixings are you designing for, and what does the wall need to take them?

  • What inspections are needed during installation?

  • Who submits the Permit To Use, and what happens if BCA asks for changes?

  • Are periodic inspections needed after installation?


Frequently asked questions


What is a Permit To Use for a signboard?

It is BCA's permit confirming that a large sign's supporting structure can be used. It is required for signs over 10 m² carried by an advertising structure, before the license is granted.

Who applies for the Permit To Use?

The Professional Engineer, through BCA's CORENET e-Submission System.

Does every outdoor sign need a PE?

No. Most shopfront signs fixed directly to a wall, and under 10 m², do not. PE involvement is needed for large signs on structures and some large banners.

How much does PE certification for a sign cost?

Typically $500 to $1,500 for sign projects, depending on size and complexity. Foundations and steelwork are priced separately.

Is a Permit To Use the same as a BCA license?

No. They are separate approvals: the Permit To Use relates to the advertising structure, and the license to displaying the sign. A large sign on an advertising structure needs both.

What does the license cost for a large advertisement?

Advertisements above 10 m² are charged $20 per m² or part thereof per sign each year, so a 12 m² advertisement costs $240 a year.


Sources


Planning a pylon or rooftop sign? Advert & Signs coordinates the PE, the Permit To Use and the license. WhatsApp +65 9862 5243 or contact us.


Comments


bottom of page