How to Choose Window Film in Singapore: Ceramic vs Reflective vs Dyed, and Reading the Data Sheet
Short answer: Choose window film by the job first (heat, UV, glare, privacy or safety), then by its data sheet: VLT for brightness, TSER for heat, exterior reflectance for looks and HDB's 20% limit, and UV rejection. Ceramic films keep views clear. Reflective films look mirrored and their privacy reverses at night. The exact model matters more than the brand.

Start with the job you need done
What you want | Film to look at | Good to know |
Cooler rooms, less glare | Solar film: ceramic, sputtered or reflective | Compare TSER. See our solar window film guide |
Protect skin, floors and furniture | Clear UV film, or any solar film | Slows fading but doesn't stop it. See our UV window film guide |
Daytime privacy with a view out | Reflective ("one-way") film | Works by day only; reverses at night |
Privacy day and night | Frosted or decorative film | See our glass frosting guide |
Hold broken glass together | Safety or security film | See our safety film guide |
Branding and graphics on glass | Printed or cut vinyl | Part of our signage work |
Film types compared
Type | How it controls heat | Look | Typical price tier | Watch out for |
Dyed | Absorbs solar energy in a dyed layer | Tinted, not shiny | Lowest | Lower heat rejection for the darkness; colour can fade over time |
Metallised or sputtered | Reflects solar energy with thin metal layers | Shiny or mirror-like from outside | Middle | Reflectance limits on HDB flats and many condos; metal layers can weaken mobile signals in some buildings |
Ceramic (nano-ceramic) | Absorbs and reflects infrared with non-metal particles | Clear to lightly tinted, low reflection | Higher | Price; compare TSER, not marketing claims |
Clear UV | Blocks UV only | Almost invisible | Lower to middle | Little heat or glare reduction |
Safety or security | Thick polyester that holds broken glass | Clear or tinted | Middle to higher | Specify by tested performance |
Frosted or decorative | Scatters light for privacy | Opaque or patterned | Lower to middle | Daylight passes, but views are blocked |
How to read a window film data sheet
Every reputable film comes with a data sheet. These are the numbers to compare:
VLT (visible light transmission): how much daylight gets through. 70% is very light; 5% is very dark.
Exterior visible light reflectance (VLR): how mirror-like the glass looks from outside. Reflective film that raises a window's daylight reflectance above 20% isn't allowed on HDB flats (PropNex). BCA uses the same 20% limit for glass in building works (BCA).
TSER (total solar energy rejected): the share of all solar energy stopped, including UV, visible light and infrared. This is the best single heat figure.
SHGC (solar heat gain coefficient): the share of solar energy let in, the flip side of TSER. A film with an SHGC of 0.30 has a TSER of about 70% (EPD Window Film).
IR rejection: be careful with this one. It covers only part of the spectrum, often at a single wavelength, so it can look impressive. The International Window Film Association encourages reporting total solar energy rejection instead.
UV rejection: look for 99% or more.
Glare reduction: useful for offices and rooms with screens.
Ask for the figures on glass like yours. A film performs differently on single clear glass than on tinted or double glazing.
The truth about one-way film
"One-way mirror" film doesn't let light through in only one direction. It reflects light, and you see a mirror from whichever side is brighter. Industry guidance suggests the bright side needs to be at least about three times brighter than the other for a strong effect (Window Film Depot). By day, the outside is brighter, so passers-by see a mirror while you see out. At night, with your lights on, it reverses: people outside can see in, and you see your own reflection.
If you need privacy after dark, combine reflective film with curtains or blinds, or use frosted film where views don't matter. Reflective films also have to stay within HDB's and many MCSTs' reflectance limits.
What about brands?
The window film brands widely sold in Singapore include 3M (for example its Prestige, Night Vision and Crystalline ranges), LLumar, Solar Gard and V-Kool. Each makes several lines at different prices and performance levels. The brand matters less than:
the exact film model, and its data sheet;
who gives the warranty (the manufacturer, the installer, or both), what it covers and for how long;
the installer's workmanship, since dust, bad edges and poor glass checks cause most complaints.
Ask any installer, including us, which exact model they are quoting, and for its data sheet.
Will the film suit my glass?
According to the European Window Film Association, window film will never cause thermal stress breakage in tempered glass and is highly unlikely to in heat-strengthened glass. Film on ordinary annealed (float) glass should always be assessed for compatibility (EWFA via Glass on Web). Double-glazed units need extra care with darker, more absorbent films. Never apply film to cracked or chipped glass.
Questions to ask before you buy
Which exact film model are you quoting, and can I see the data sheet?
What are its TSER, VLT and exterior reflectance on glass like mine?
Will it meet HDB's or my MCST's reflectance rules?
Have you checked my glass type for thermal stress?
Who gives the warranty, for how long, and what does it cover?
Is removing my old film included?
Who does the installation, your own team or a subcontractor?
Can I see a sample on my own window first?
FAQ
Is a darker film always cooler?
Among films of the same type, darker usually rejects more heat. Ceramic and other spectrally selective films are designed to reject more heat for their brightness, so a light ceramic film can outperform a darker dyed one. Compare TSER at the VLT you are comfortable with.
Is ceramic film worth the extra cost?
If you want clear views, low reflection and good heat rejection together, often yes. If you mainly want privacy or UV protection, a cheaper film may do the job.
Will window film affect my mobile phone signal?
Films with metal layers can weaken signals in some buildings. Ceramic films don't contain metal.
Can film go on the outside of the glass?
Some films are made for exterior use, which helps on double glazing and hard-to-reach interior faces. Most residential jobs use interior films.
How do I get advice for my windows?
WhatsApp us photos of the windows, which way they face and what's bothering you on +65 9862 5243, or see our window film service.




Comments